Wuhan Golden Laser Co., Ltd.
Wuhan Golden Laser Co., Ltd.
Contact Us
How Can Tube Laser Cutting Machine Achieve Fast Cutting Effect

How Can Tube Laser Cutting Machine Achieve Fast Cutting Effect

As everyone in the industry knows, rapid cutting is one of the inherent advantages of tube laser cutting machines. However, some manufacturers feel that the original speed cannot meet their actual production needs, so they ask us whether there is a better way to achieve a faster cutting speed so that the tube laser cutting machine can play the maximum effect. Today, Golden Laser will introduce to you how to debug the cutting effect of the tube laser cutting machine and the method of adjusting the cutting speed.


Ⅰ. Debug the parameters of the tube laser cutting machine and improve the cutting speed of the machine


Machine parameter setting is one of the main reasons that affect the cutting speed of the tube laser cutting machine. Under normal circumstances, if the parameters are not adjusted well, its cutting speed will not work. The parameters are like a series of related actions such as starting, accelerating, etc. when a person is driving. If the parameters are not set properly, it is like when the car is starting, you hang a high-speed gear to start, which will cause the car to shake. Therefore, when adjusting this parameter, you should pay attention to the following two points:


1. Initial speed: This setting is the speed at which the machine starts, just like the speed at which the car just starts while driving. Many customers have such a misunderstanding that the higher the initial speed, the better, but this is actually wrong. If the initial speed of the laser tube cutter is set too high, the machine will shake a lot.


2. Acceleration: Acceleration means how fast the speed of the car increases during the driving process. It is the time it takes from the initial speed to the normal cutting of the machine. The machine is an iterative process of starting and stopping as it cuts different patterns, so setting the acceleration too low will cause the machine to cut more slowly.


Ⅱ. Adjust the assembly of the tube laser cutting machine to improve the cutting effect of the machine


1. Guide rail installation: The guide rail installation should be parallel. If the installation is not parallel, the machine will have resistance when running, the operation will be stuck, and there will be saw teeth when cutting. Therefore, the installation of the two guide rails in the Y-axis direction should be two parallel lines, and there should be no error between them.


2. Installation of beams and couplings: When the beams and couplings of the machine are installed, if the screws are not locked, or the locking is inclined, etc., these will cause the above-mentioned problems.


The above is the method of tube laser cutting machine to quickly cut and improve the cutting effect. Hope it will be helpful to everyone. If you want to know more about tube laser cutting machines, please contact us.


Golden Laser is a laser machine manufacturer that integrates R&D, production, sales, service, and laser system. It is a high-tech enterprise specialized in fiber laser cutting machine, fiber laser cutting machine, 3D manipulator laser cutting machine, laser welding machine, and fiber laser flexible manufacturing systems. If you have any needs, please feel free to consult us.

Ask For The Best Price